Mirapoint RazorSafe 700, Hardware Manual

Page: 36 / 98

Replacing Appliance Components
30
2
Opening and Closing the Appliance
c
Only trained service technicians are authorized to remove the appliance cover and
access any of the components inside the appliance. Before you begin this procedure,
review the safety instructions that came with the appliance.
w
Whenever you need to lift the appliance, get others to assist you. To avoid injury, do
not attempt to lift the appliance by yourself.
Opening the Appliance
To open the appliance:
1. Unless you are installing a hot-swappable component such as a cooling fan or
power supply, power off the appliance and attached peripherals, and disconnect
the appliance from the electrical outlet and peripherals.
2. Rotate the latch release lock counter-clockwise to the unlocked position
(
Figure 9 on page 31).
3. Lift up on the latch on top of the appliance and slide the cover back ( Figure 9
on page 31).
4.
Grasp the cover on both sides and lift the cover away from the appliance.
Closing the Appliance
To close the appliance:
1.
Lift up the latch on the cover.
2. Place the cover onto the chassis and offset the cover slightly back so that it
clears the chassis hooks and lays flush on the appliance chassis (
Figure 9 on
page 31).
3.
Push down the latch to lever the cover into the closed position.
4. Rotate the latch release lock in a clockwise direction to secure the cover.