Mirapoint RazorSafe 700, Hardware Manual

Page: 25 / 98

LCD Status Messages
19
E1715 Fatal I/O Error. Review
& clear SEL. The system BIOS has
determined there has
been a fatal error in the
system. Check the SEL for
more information, and
then clear the SEL.
Remove AC power to
the appliance for 10
seconds, and restart the
appliance.
If the problem persists,
see
Getting Technical
Support on page 2.
E1716 Chipset IERR Bus ##
Dev ## Function ## .
Review & clear SEL.
The system BIOS has
reported a chipset
internal error that resides
in bus ##, device ##,
function ##. Check the SEL for
more information, and
then clear the SEL.
Remove AC power to
the appliance for 10
seconds, and restart the
appliance.
If the problem persists,
see
Getting Technical
Support on page 2.
E1717 CPU # internal error.
Review & clear SEL.
The system BIOS has
determined that the
specified processor has
had an internal error. Check the SEL for
more information, and
then clear the SEL.
Remove AC power to
the appliance for 10
seconds, and restart the
appliance.
If the problem persists,
see
Getting Technical
Support on page 2.
E171F PCIe fatal error on Bus
## Device ## Function
## The system BIOS has
reported a PCIe fatal
error on a component
that resides in PCI
configuration space at
bus ##, device ##,
function ##. Remove and reseat the
PCIe expansion cards.
If the problem persists,
see
Troubleshooting
Expansion Cards on
page 80.
PCIe fatal error on Slot
#. Review & clear SEL. The system BIOS has
reported a PCIe fatal
error on a component
that resides in the
specified slot. Reinstall the
expansion-card riser.
See
Expansion Cards
and Expansion-Card
Risers
on page 47. If
the problem persists,
the riser card or
system-board is faulty.
See
Getting Technical
Support on page 2.
Table 4 LCD Status Messages (Continued)
Code Text Cause Corrective Actions