Minolta PagePro 25 Manual Download Page 38

Page: 38 / 263

Unpacking, setting up and pre-settings

2-22

PagePro 25

Rev. 3.1.1/16.07.99

Press the [ENTER] key.

The test page is now printed.

What if no test page is printed or
an error message appears in the
display?

The test page can only be
printed on DIN--A4 paper. No
DIN-A4 paper is available for the
printer.

➜

Change the configuration of the
paper tray to DIN-A4 paper and
load the corresponding paper,
see page 6-4.

✎

Be well prepared for technical questions.
Please have a current test page available when calling for technical
assistance.

Job Cancel

Enter

Summary of Contents for PagePro 25








































































































































































































































































Search results

Summary of Contents for PagePro 25

Reviews:

Related manuals for PagePro 25

Brands by name

Popular brands

Minolta PagePro 25, Manual

Search results

Summary of Contents for PagePro 25

Reviews:

Related manuals for PagePro 25

Brands by name

Popular brands