Unpacking, setting up and pre-settings
2
Rev. 3.1.1/16.07.99
PagePro 25
2-17
Adjust tray 2
Adjust tray 2 to a different Paper size if so desired.
1
Remove the tray.
2
Press the paper lifting plate down
until it locks in place.
3
Loosen the fastening screws of the
paper guides with a Phillips screw
driver.
4
Move the paper guides to the marks
of the desired Paper size.
5
Tighten the fastening screws of the
paper guides in the new position.
6
Set the paper in place between the
paper guides. The stack of paper
must not exceed the maximum
filling height (see the orange mark
on the tray).
Summary of Contents for PagePro 25
