6
Working with the printer
6-24
PagePro 25
Rev. 3.1.1/16.07.99
Correcting the left Offset for duplex printing
1
Press the [ON LINE] key.
The display shows OFF-LINE. The printer has been switched Off Line.
2
Press the [MENU] key until SETTINGS MENU is displayed.
3
Press the [SCROLL] key until DUPLEX OFFSET is displayed.
4
Press the [SELECT] key until the desired correction value for the left
Duplex Offset is displayed.
❍
Increasing the value (+) reduces the size of the left offset.
❍
Reducing the value (-) increases the size of the left offset.
5
Press the [COMFIRM KEY] to save your Offset correction.
An asterisk (*) is displayed on the right next to the selection.
6
Print test page 1 (see page 6-21) again and test page 2
(see page 6-22) to check the Offset correction.
Summary of Contents for PagePro 25
