Minolta PagePro 25 Manual Download Page 144

Page: 144 / 263

Installing optional accessories

7-18

PagePro 25

Rev. 3.1.1/16.07.99

7.6

Installing the 5-bin mailbox

Preparing for installation of the 5-bin mailbox unit

Take the parts of the unit out of the carton and remove the protective
plastic sleeve.

Remove the packaging materials and adhesive strips.

Turn the printer OFF and remove the power plug and the interface plug
from the printer.

Installing 5-bin mailbox

Remove the two small covers on the
top of the printer and the small
cover on the side of the printer.

Align the rear edge of the 5-slot
mailbox on the dash-shaped mark
that is visible from the control panel
side.

Push the guiding pins forward into
the holes.

Summary of Contents for PagePro 25








































































































































































































































































Search results

Summary of Contents for PagePro 25

Reviews:

Related manuals for PagePro 25

Brands by name

Popular brands

Minolta PagePro 25, Manual

Search results

Summary of Contents for PagePro 25

Reviews:

Related manuals for PagePro 25

Brands by name

Popular brands