Recognizing and eliminating problems
9
Rev. 3.1.1/16.07.99
PagePro 25
9-19
The printout is too
light
The save toner mode is
activated.
Check the setting in the printer
driver and in the printer menu.
Change the setting and try it
again.
The toner density is not set
correctly in the print menu.
Set the toner density to the
desired level, see page 5-13.
The toner in the imaging
cartridge is low.
Remove the imaging cartridge
and shake it carefully to better
distribute the remaining toner. If
the problem persists, put in a
new imaging cartridge, see page
8-6.
The imaging cartridge is
damaged.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Printout is too dark
The imaging cartridge is
damaged.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
The toner density is not set
correctly in the print menu.
Set the toner density to the
desired level, see page 8-6.
Blurred
background on the
printout
The imaging cartridge is
damaged.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Problem
Possible cause
Action to take
Summary of Contents for PagePro 25
