Minolta EP3000 Manual Download Page 184

Page: 184 / 329

FrameMaker Ver.5.5E(PC) EP3000/EP3010 DIS/REASSEMBLY, ADJUSTMENT
98.05.29

D-22

•

Remove the Original Cover, Original Scales, and Original Glass.

•

Remove the Middle Right, Upper Right, Right, Upper Left, and Upper Rear Covers.

•

Remove the Left and Right Hinge Covers, Rear Upper Cover (Small), and Rear Upper
Cover.

(3) Removal of the Scanner Drive Cable

6. Temporarily secure the longer length of the Cable

to the Cable Fixing Bracket, ensuring a distance of
5 ± 2 mm for the dimension shown on the left.

1139D124AA

7. Wind the shorter length of the Cable around the

Pulley which is nearer to the Cable Drive Gear.

1139D125AA

8. Hook the spring onto the shorter length of the

Cable and pull it to hook onto the longer length of
the Cable.

9. Check that the dimension noted in step 6 above

measures 5 ± 2 mm. Then, secure the Cable Fix-
ing Bracket.

10. Remove the wrench and peel off the two pieces of

tape.

1139D126AA

1. Align the Scanner with the rectangular hole in the

upper copier frame and remove the screw from the
Scanner Fixing Bracket.

2. Remove the Fixing Bracket.

1139D128AA

Summary of Contents for EP3000










































































































































































































































































































































Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands

Minolta EP3000, Manual

Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands