Minolta EP3000 Manual Download Page 326

Page: 326 / 329

FrameMaker Ver.5.5E(PC) EP3000/EP3010 TROUBLESHOOTING
98.08.06

T-89

4. Foggy background

Cause

Step

Check Item

Result

Action

Cleaning failure

Is the Cleaning Blade dirty with
foreign matter, paper dust, etc.
or is it scratched?

YES

Change the Cleaning Blade.

Optical failure

Is the mirror or lens dirty?

YES Clean the mirror or lens.

PC Drum failure

Is the PC Drum dirty with for-
eign matter, etc.?

YES

Clean or replace the PC Drum.
Replace the Cleaning Blade if
necessary.

Is the PC Drum properly
grounded?

Clean or replace the PC Drum
Ground Plate.

Developing failure

Is the Sleeve Roller abnor-
mally dirty?

YES

Clean the Sleeve Roller.
Check the Developer Scatter-
ing Prevention Seal to see if it
is deformed or dirty.

Is the developing bias contact
normal?

Clean or replace the develop-
ing bias contact.

Main Erase Lamp
failure

Does the Main Erase Lamp
light up properly?

Replace the Main Erase Lamp.

Is the Main Erase Lamp dirty?

YES Clean the Main Erase Lamp.

AIDC Sensor fail-
ure

Is the AIDC Sensor clean or
installed properly?

Clean or reinstall the AIDC
Sensor and execute F5.

Is the AIDC halftone pattern
dirty?

YES

Using care not to scratch, wipe
the pattern with a dry soft cloth
and execute F5.

Summary of Contents for EP3000










































































































































































































































































































































Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands

Minolta EP3000, Manual

Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands