FrameMaker Ver.5.5E(PC) EP3000/EP3010 DIS/REASSEMBLY, ADJUSTMENT
98.05.29
D-6
No.
Part Name
Removal Procedure
1
Front Door
Swing down No. 1.
→
Remove one screw that secures the
Belt.
→
Remove two screws that secure the Front Door (only
on one side).
→
Slide the Door to the side from which the
screws have been removed.
2
Control Panel
Open 1.
→
Loosen two screws that secure the Control panel.
3
Original Scales
Remove two screws that secure the Scales.
4
Original Glass
5
Rear Upper Cover
(Small)
Remove the Original Cover.
→
Release and swing up the
Upper Half of the copier.
→
Remove the Screw Cover and one
mounting screw of No. 5.
6
Left Hinge Cover
Remove the Original Cover.
→
Remove one screw that
secures the Left Hinge Cover.
7
Rear Upper Cover
Remove the Original Cover.
→
Remove No. 6, 8 and 9.
→
Remove one screw that secures No. 7.
8
Right Hinge Cover
9
Upper Right Cover
10
Right Cover
Remove No. 11.
→
Remove No. 9.
→
Remove two screws that
secure No. 10.
11
Middle Right Cover Remove three screws that secure No. 11.
12
Right Door
Open No. 12 and remove it by lifting it up.
13
Counter Cover
Remove No. 14 by snapping if off.
14
1st Drawer
Slide out the Drawer and remove one screw that secures the
Stopper at the rear left corner.
15
2nd Drawer
16
Lower Rear Cover
Remove two screws that secure the Lower Rear Cover.
17
Rear Cover
Swing down No. 1.
→
Release and swing up the Upper Half of
the copier.
→
Remove two screws that secure the Rear Cover.
18
Upper Rear Cover
Swing down No. 1.
→
Release and swing up the Upper Half of
the copier.
→
Remove three screws that secure the Upper
Rear Cover.
19
Original Cover