Minolta EP3000 Manual Download Page 128

Page: 128 / 329

FrameMaker Ver.5.5(PC) EP3000/EP3010 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.05.29

S-22

[Tech. Rep. Mode

Tech. Rep. Choice 2/2]

Touch Panel Display

Setting (The default is

Function Limit

Select whether to limit (“ON”) the functions that can be set on the
control panel or not (“OFF”).

Image Exposure

Vary the Vg voltage to set the desired image density.

Simplex/Duplex?

Select the copying mode types that can be set to be selected in
“Orig.

Copy Default” of User’s Choice.

Universal Tray 13"x

Set the inch size of paper to be used in the Universal Tray.

Universal Tray 14"x

Set the inch size of paper to be used in the Universal Tray.

Bin Movement

Select whether or not the Sort Bins will automatically move upward
after the last copy is ejected into the Bins.

▲

Highlighted

Functions that can be set are lim-
ited to the number of copies to be
made, paper size, zoom ratio, and
exposure level only.

All functions can be set.

OFF

Display

Description

Display

Description

47
48
49

-90V

-60V

-30V

±0V

51
52
53
54

+30V

+60V

+90V

+120V

▲

Both

Permits selection of all copying
modes.

Permits selection of 2-sided copy-
ing mode only.

Duplex only

8¼”

8½”

8¼”

8½”

After the last copy, the Sort Bins
automatically move upward.

OFF

After the last copy, the Sort Bins do
not move upward.

Summary of Contents for EP3000










































































































































































































































































































































Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands

Minolta EP3000, Manual

Search results

Summary of Contents for EP3000

Reviews:

Related manuals for EP3000

Brands by name

Popular brands