Mindray DC-80A, Operator'S Manual

Page: 171 / 391

Image Optimization 5-91
Operation Rotate the knob under [Filter] on the touchpad.
The higher the level is, the smaller the noise of the elasto image becomes, and the
clearer the edge of the field target appears.
Impacts
The system restarts scanning B image and E image after the filtering is completed.
Map Position
Description
This feature is used to adjust the up/down position of the map.
Operations Tap [Map Position] on the touch screen to adjust the parameter.
Lesion
Description
It is used to distinguish elastography data of the different lesion region.
Operations Tap [Lesion] on the touch screen to adjust.
E Avg
Description Used to optimize the measurement result via equalizing the elasto metric of the current
frames and the previous frames.
Operation
Rotate [E Avg] knob to adjust the value.
The adjusting range is: 2-10.
Off represents the E Avg is disabled. The larger the scale is, the more the frames of the
elasto metric are equalized.
Impacts Decrease the image noise.
E bar
Description This feature supports the elasto curve to be displayed based on different statistical
amounts.
Operations Tap [E bar] on the touch screen to adjust the parameter.
Save All
Description
Used to send all current elasto curve data to the relevant exam report.
Operation
Tap [Save All] on the touch screen to send the data.
5.13.2.3 Measuring
Press <Caliper> to enter general measurements. You can perform the measurements of Elastography,
Elas. Ratio, Directional Ratio, Elas. Hist and etc.
Press <Measure> to enter application measurement. You can perform measurements on Isthmus and
Mass, etc.
Refer to Operator’s Manual (Advanced Volume) for details.
5.13.2.4 Cine Review
Press <Freeze> to freeze the image and enter cine review state.