Page 1-6
Chapter 1: Machine Overview
|
Section 1.5: Explanation of Symbols
Section 1.5: Explanation of Symbols
There are several different warning symbols placed on the Miller
Weldmaster T-500 and T-100. These symbols are to alert the operator
of potentially hazardous areas on the machine. Familiarize yourself
with the their placement.
Figure 1.3:
Caution, Unplug Machine…
The Caution, Unplug Machine sticker is placed near the opening of
the cabinet and all access panels. To prevent electrocution, the
welder should always have the power disconnected before the cabinet
door is opened.
Figure 1.4:
Warning, High Temperature Air...
The Warning High Temperature Air sticker is placed on the Heater
Assembly. The T-500 and T-100 are capable of temperatures reaching
1350 degrees F.
Figure 1.5:
Caution, Do Not Apply Stress...
The Caution, Do Not Apply Stress sticker is placed on the Heater
Assembly. Do not apply any unnecessary force on this part of the T-
500 and T-100.
Figure 1.6:
Pinch Points...
The Pinch Point decal is placed on the protective guard of the T-
100 and T-500. The symbol is to alert the user of the pinch point of
the two weld rollers.
Figure 1.7:
Heat...
The Heat decal is placed on the protective guard of the T-100 and
T-500. The symbol is to alert the user of the hot air or hot wedge.
Summary of Contents for T-100
Page 1: ......
