Page 1-5
Chapter 1: Machine Overview
|
Section 1.4: Transportation, Specifications, and Storage
Figure 1.2: T-500
Module 1.4.2: Transporting Outside Production Facility
The manufacturer requires the Miller Weldmaster T-500 and T-100
be placed on a pallet using a forklift or tow motor. The forks are to
be inserted below the bottom frame along the center of gravity.
Secure the machine to the pallet. To protect the various controls and
features, crate the machine. When loading into a truck for
transportation, use a forklift or tow motor.
Module 1.4.3: Storage
The manufacturer recommends that any time the machine is not
in use, it must be protected from excess dust and moisture.
MILLER
WELDMASTER
CORPORATION
T-500
24.000
1.000
49.750
117.843
108.603
81.625
32.500
46.250
41.500
Center of Gravity
Units in Inches
Fork
Fork
Table 1-1:
Specifications
T-100
T-500
Approximate Weight
510 lbs
780 lbs
Approximate Crated Weight
800 lbs
1090 lbs
Crated Width
32 in
32 in
Crated Length
75 in
120 in
Crated Height
65 in
65 in
Noise level during operation
90 dB(A)
90 dB(A)
Summary of Contents for T-100
Page 1: ......
