Page 9-5
Chapter 9: Accessories
|
Section 9.5: Guides
*Most T-100 & T-500 welders are Right Hand Swing. The Swing is defined by the
direction the Hot Air Nozzle swings into the welding position. For example, if the Hot Air
Nozzle is normally positioned to the left and swings to the right to begin the welding
operation, it is a Right Hand Swing.
*There are a number of Miller Weldmaster welders that have some custom built nozzles.
These would be for special applications. If your nozzle does not resemble any of the pictured
nozzles, consult a Miller Weldmaster representative.
Section 9.5: Guides
•
381032 Hot Air/ Hot Wedge Universal Overlap Guide,Top Mount Style
380713
1.250 inch width fluted style
380717
1.500 inch width
380721
1.750 inch width
380725
2.000 inch width
Table 9-7:
T-100 & T-500 Left Hand Hot Air Nozzle with
Ball End
380729
0.500 inch width
380733
0.750 inch width
380737
1.000 inch width
380741
1.250 inch width
380745
1.500 inch width
380749
1.750 inch width
380751
2.000 inch width
Table 9-6:
Standard T-100 & T-500 Right Hand Hot Air Nozzles
with Ball End
Summary of Contents for T-100
Page 1: ......
