Page 4-2
Chapter 4: Operating Procedures
|
Section 4.2: Shut Down
Section 4.2: Shut Down
1. Turn the Hot Air or Wedge Switch to the off position. The corresponding Temperature
Controller should shut off.
2. Turn the Power Switch to the off position.
The machine will not shut off immediately!
Hot Air machines will go through a 3 minute cool down cycle to allow the heat elements
to cool off. It will then shut down completely. The Hot Wedge machines do not have a
cool down cycle and should shut down immediately.
3. After the machine has shut off, rotate the In Shop Air Supply Valve to the off position.
4. After the machine has shut off, turn the Circuit Breaker to the off position.
Summary of Contents for T-100
Page 1: ......