Miller Weldmaster T-100, Manual

Page: 12 / 56

Page 1-11
Chapter 1: Machine Overview |
Section 1.6: Controls: Purposes and Functions
Figure 1.20:
Outboard Puller
Switch
Outboard Puller Switch
The purpose of the Outboard Puller Switch is to control the
Outboard Puller Assembly, which assists moving material from the
welding area, in conjunction with the double roller beam.
When the Outboard Puller Switch is turned to the on position, the
Outboard Puller Assembly will automatically lower into the pulling
position and the puller rollers will rotate when the Drive Foot Switch
is engaged.
When the Outboard Puller Switch is turned to the off position, the
Outboard Puller Assembly will remain in the raised position when the
Drive Foot Switch is engaged. The puller rollers will not rotate.
Figure 1.21:
Inboard Puller
Switch
Inboard Puller Switch
The purpose of the Inboard Puller Switch is to control the Inboard
Puller, which assists feeding material into the welding area, in
conjunction with T-500 welders with a double roller beam.
When the Inboard Puller Switch is turned to the lower position,
the inboard puller assembly will automatically lower itself to the
pulling position. The rollers will turn when the Drive Foot Switch is
engaged.
When the Inboard Puller Switch is turned to the raise position,
the Inboard Puller Assembly will return to the raised position. The
puller rollers will not rotate when the Drive Foot Switch is engaged.
Figure 1.22:
Master Speed Control
The purpose of the Master Speed Control is to control the speed
of the weld rollers and puller rollers during the welding process.
By turning the Master Speed Control dial clockwise, the speed of
the weld rollers and puller rollers will increase.
By turning the Master Speed Control dial counter clockwise, the
speed of the weld rollers and puller rollers will decrease.
Outboard Puller Sync
The purpose of the Outboard Puller Sync Control is to synchronize
the outboard puller rollers to the weld rollers. The Outboard Puller
Sync numbers are only used as a reference and do not have any
relationship and should not match the master speed control settings.
By turning the Outboard Puller Sync Control dial clockwise, the
Outboard Puller will increase in speed in relation to the weld rollers.
Master Speed Control