Page 7-7
|
Section 7.2: Replacing Components
7. Remove the 4 leads from the heat
elements.
8. Loosen the 4 screws securing the
aluminum air divider.
9. Remove the 4 screws and spacers being
careful not to loose the 4 spacers.
10. Remove the aluminum air divider.
11. Carefully remove the heat elements
from the element housing.
NOTE:
Inspect each element for any
broken off fragments of glass or
wire. Any missing fragments will
be in the dual element housing.
These fragments must be removed
before installing new elements.
12. Carefully install 2 new heat elements
into the dual element housing.
13. Install the aluminum air divider.
14. Install the 4 spacers and screws and
tighten down.
Summary of Contents for T-100
Page 1: ......
