![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539084.webp)
Changing the door hinging
84
Push the pin
up and out from
below using a flat-headed
screwdriver.
Remove the cover
.
Now the soft-close mechanism and the
appliance are no longer connected.
Remove the panel
.
Slide the soft-close mechanism
bracket
as far as it will go towards
the handle side of the door, and undo
the screws
on the soft-close
mechanism.
Using a flat-headed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
Put the soft-close mechanism aside.
Removing the upper door
Loosen the cover
by carefully
inserting a flat-headed screwdriver
into the gap from below.
Remove the cover
together with
the retainer
.
Separate the retainer
from the
cover
by pushing it to the left
slightly and then pulling the cover
forward and off.
Turn the retainer
180°.
Fit the cover
on the retainer
from the front and push it to the right.
The writing must be visible.
Unscrew the hinge part
, turn it
180° and fit it on the opposite side. If
necessary drill pilot holes for the
screws.
Remove the upper cover
by sliding
it forward from the back and then
lifting it up and off.
Remove the cover
by pulling it
upwards.
Close the upper appliance door.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...