![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539092.webp)
Changing the door hinging
92
Reattaching the door handles
Please make sure you follow the
instructions below carefully when you
refit the handles. The door seal will be
damaged if the handles are fitted
incorrectly.
To begin with, loosely attach the door
handle to the opposite side with the
two front screws
.
The mounting plate
must be
positioned on the door casing so that
when the door is closed it is flush with
the outer wall of the appliance.
If this is not the case, turn the two
pre-mounted set screws
with the
Allen key until the mounting plate
is positioned at the correct angle.
Firmly tighten all 4 screws
.
From the appliance side, slide the
sidebar
into the guide on the
mounting plate until you hear it click
into place.
Make sure that the sidebar
does
not come into contact with the door
seal when the door is opened. This
would cause permanent damage to
the door seal.
If this is the case, realign the
mounting plate
using the set
screws
until the mounting plate
and the sidebar
are at the correct
angle and the sidebar no longer
comes into contact with the seal
when the door is opened.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...