manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Operating And Installation Instructions

Share
Download
Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions Download Page 20

Before using for the first time

20

Before using for the first time

Removing packaging material

Remove all packaging material from
the inside of the appliance.

Protective foil

The stainless steel strips of the shelves
and the door shelves have a layer of
protective foil to prevent scratching
during transportation. The external
surfaces of the appliance doors and
possibly also the side panels are
covered with a protective foil.

Remove the protective foil only after
the appliance has been installed in its
intended location.

Cleaning and care

Please refer to the relevant
instructions in "Cleaning and care".

Immediately after removing the
protective foil, apply the Miele Care
product for stainless steel (see
"Accessories - Optional accessories")
to stainless steel strips and frames.

We recommend treating the side
panels of a stainless steel appliance
with the Miele Care product for
stainless steel immediately after
removing the protective foil (see
"Accessories - Optional
accessories").

Each time the Miele Care product for
stainless steel is used, it applies a
protective film that is stain and water
resistant.

Important: The stainless steel
appliance doors have a special
coating that is resistant to dirt. Do not
treat them with the Miele Care product
for stainless steel!

Clean the inside of the appliance and
the accessories.

Summary of Contents for KFN 14827 SDE ed/cs-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands