![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539076.webp)
Installation in a side by side combination
76
Installation steps for the front of the
appliances
Screw the adjustable feet
(for
supporting the doors) in fully using
the spanner
supplied. They must
not touch the floor.
Fit the caps
on the four front
adjustable feet.
Place the appliances next to each
other so that the fronts are aligned,
leaving a gap of 10 mm between
them.
Remove the top covers
.
When the connecting plate is fitted,
both appliances will be aligned with
each other in height and depth. If one
appliance stands higher than the
other, start with the higher one first.
Place the connecting plate
in
position and loosely attach it to
one
of the appliances
with two screws
.
Adjust the connecting plate
until
its centre piece abuts against the side
of the appliance.
Now tighten both screws
.
Screw the connecting plate
to the
second appliance
. When doing so
push the appliances together or
further apart as necessary.
Remove both covers
, if present,
from the bottom of the appliances.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...