![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539085.webp)
Changing the door hinging
85
Danger of injury when removing
the appliance door!
The appliance door is no longer
secure once the hinge plate has
been removed.
The door must be held by a second
person.
Loosen the screws
in the upper
hinge plate
and pull it upwards and
off.
Danger of injury when removing
the upper door!
As soon as the hinge pin is located in
the upper door rather than in the
middle hinge plate, the lower door is
not secured and could fall off.
Ensure that the hinge pin remains
located in the middle hinge plate and
in the lower door.
Carefully lift the upper door up and
off and set it aside.
Then fit the cover
together with the
retainer
on the opposite side.
Attach the cover
on the opposite
side.
Removing the lower soft-close
mechanism
Open the lower door.
If a door seal is damaged the
door will not close properly and
cooling performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals.
Loosen the panel
from the soft-
close mechanism by inserting a flat-
headed screwdriver into the gaps
from below and, taking care,
gradually lifting the panel off.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...