![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539093.webp)
Aligning the appliance doors
93
The appliance doors can be aligned
with the appliance housing after they
have been fitted.
In the following illustration the door is
not shown in the closed position to
make it easier to see what you have to
do.
To align the lower door use the long
outer slots in the lower hinge plate:
Remove the centre screw
from the
hinge plate.
Slightly loosen both outer screws
.
Align the door by sliding the hinge
plate to the left or right.
Then tighten the screws
. The
screw
does not need to be refitted.
To align the upper door, use the outer
slots in the middle hinge plate:
Slightly loosen both screws
.
Align the door by sliding the hinge
plate to the left or right.
Then tighten the screws
.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...