manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Operating And Installation Instructions

Share
Download
Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions Download Page 79

Installation in a side by side combination

79

Press the long piece of stainless steel
trim 

 into the gap at the front

between the two appliances. Ensure
that it is seated against the
connecting bracket 

.

Useful tip: 

Press both ridges along the

entire length of the trim together. This
simplifies the process of fitting the trim
into the gap.

Carefully work the stainless steel trim

 into the gap. Use a soft cloth to do

this to avoid denting the trim.

Remove the protective foil from the
stainless steel trim.

Press the top edge of the short trim

 into the gap. When doing so make

sure that the front edge of the trim is
flush with the edge of the connecting
plate 

.

Clip the cover 

 between the two

control panels. Ensure that the
outside edges of the cover are flush
with the control panels. The cover is
extendable for this purpose.

Summary of Contents for KFN 14827 SDE ed/cs-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands