manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Operating And Installation Instructions

Share
Download
Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions Download Page 18

Accessories

18

Accessories supplied

KKF-FF (Active AirClean) charcoal
filter with holder

The charcoal filter neutralises
unpleasant odours in the refrigerator
section for improved air quality.

Bottle rack

Bottles can be stored horizontally in the
refrigerator section using the bottle rack
to save space.
The bottle rack can be placed in
different positions in the refrigerator
section.

Cool pack

The cool pack prevents the temperature
in the freezer section from rising too
quickly in the event of a power cut. This
helps to prolong the storage life.

The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.

Optional accessories

A range of useful Miele accessories and
care products are available for your
appliance.

Care of stainless steel

Each application of the 

Miele Care

product for stainless steel

 (in the

bottle) forms a durable protective film
that is stain and water resistant. It
gently removes water marks,
fingerprints and other stains for a
uniformly shiny surface.

Miele all purpose microfibre cloth

Light soiling and fingerprints on
stainless steel fronts, control panels
and furniture can be easily removed
with this microfibre cloth.

KKF-RF
Active AirClean replacement filters

Replacement filters to fit the Active
AirClean holder are available. We
recommend replacing the charcoal
filters every 6 months.

Summary of Contents for KFN 14827 SDE ed/cs-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands