![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539090.webp)
Changing the door hinging
90
Make sure that the cover
fits properly
so that the door can be closed without
hindrance and the pin is secured.
Remove the safety device
.
Replace the panel
onto the soft-
close mechanism from above,
clicking it back into place first at the
bottom and then at the top.
Close the lower appliance door.
Refitting the upper door
Place the upper door onto the hinge
pin
in the middle of the appliance.
Close the upper appliance door.
Fit the hinge plate
on the opposite
side and secure it in place with the
screws
.
Useful tip:
Drill pilot holes for the
screws first.
Attach the cover
on the opposite
side.
Align the door with the appliance
housing using the slots in the lower
hinge plate. Then tighten the screws.
Refitting the upper soft-close
mechanism
Remove the cover
from the
panel
, turn it 180°, and reinsert it
on the other side.
Insert the soft-close mechanism back
into the door, starting at the
appliance side.
Using a flat-headed screwdriver, slide
the soft-close door mechanism
towards the appliance side.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...