![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539031.webp)
Further settings
31
Confirming replacement of
charcoal filters
If you have replaced the charcoal filters
at a later stage and the message to
replace them has gone out, the time
counter must be reset in settings mode:
Touch and leave your finger on the
sensor.
At the same time, briefly touch the
On/Off sensor
(without letting go
of the
sensor).
Leave your finger on the
sensor for
another 5 seconds until
appears in
the display.
Touch the
sensor repeatedly until
appears in the display.
Touch the On/Off sensor
to
confirm.
Touch the
sensor repeatedly until
appears in the display.
Touch the On/Off sensor
for
approx. 2 seconds to confirm.
The counter is now reset.
Touch the
sensor repeatedly until
appears in the display.
Touch the On/Off sensor
.
You have left settings mode.
Switching the safety lock on/
off
The safety lock can be activated to
prevent the appliance being switched
off by mistake.
Touch and leave your finger on the
sensor.
At the same time, briefly touch the
On/Off sensor
(without letting go
of the
sensor).
Leave your finger on the
sensor for
another 5 seconds until
appears in
the display.
Touch the
sensor repeatedly until
appears in the display.
Touch the On/Off sensor
to
confirm.
By touching the
sensor, you can
now select whether the safety lock is
switched on or off:
–
: safety lock is switched off.
–
: safety lock is switched on.
–
: return to menu
The current setting lights up, and the
setting you can select next flashes.
Touch the On/Off sensor
to
confirm the new setting.
Touch the
sensor repeatedly until
appears in the display.
Touch the On/Off sensor
.
You have left settings mode.
When the safety lock is activated, the
safety lock indicator
will light up in
the temperature display.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...