![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539091.webp)
Changing the door hinging
91
The screw holes on the left and right
must line up perfectly.
First screw the soft-close mechanism
onto the appliance side, then onto the
handle side using the screws
,
pushing it firmly towards the
appliance.
Attach the panel
onto the soft-
close mechanism bracket
.
Slide the cover
on from the side so
that the openings for the pin
are
aligned.
Pull the soft-close mechanism
bracket
toward the hinge plate and
insert the pin
from above so that
the square fits into the recess.
Click the cover
completely into
place.
Make sure that the cover
fits properly
so that the door can be closed without
hindrance and the pin is secured.
Remove the safety device
.
Replace the panel
onto the soft-
close mechanism from above,
clicking it back into place first at the
bottom and then at the top.
Close the upper appliance door.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...