manualshive.com logo in svg

Miele KFN 14827 SDE ed/cs-2, Operating And Installation Instructions

Share
Download
Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions Download Page 89

Changing the door hinging

89

Insert the hinge pin 

 in the middle

of the appliance through the hinge
plate 

 and into the lower door.

Lower soft-close mechanism

Remove the cover 

 from the

panel 

, turn it 180°, and reinsert it

on the other side.

Insert the soft-close mechanism back
into the door, starting at the
appliance side.

Using a flat-headed screwdriver, slide
the soft-close door mechanism
towards the appliance side.

The screw holes on the left and right
must line up perfectly.

First screw the soft-close mechanism
onto the appliance side, then onto the
handle side using the screws 

,

pushing it firmly towards the
appliance.

Attach the panel onto the soft-close
mechanism bracket 

.

Pull the soft-close mechanism
bracket 

 toward the hinge plate and

insert the pin 

 from above so that

the square fits into the recess.

Fit the cover 

 back into place so

that it engages.

Summary of Contents for KFN 14827 SDE ed/cs-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands