![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539083.webp)
Changing the door hinging
83
Removing the upper soft-close
mechanism
Open the upper appliance door.
If a door seal is damaged the
door will not close properly and
cooling performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals.
Loosen the panel
from the soft-
close mechanism by inserting a flat-
headed screwdriver into the gaps
from below and, taking care,
gradually lifting the panel off.
Push the panel
toward the
appliance and leave it hanging there
between the door and appliance for
the time being.
Place the safety device
(supplied
with the refrigerator) on the soft-close
mechanism
so that it engages.
The safety device prevents the hinge
from snapping shut.
Do not remove the red safety device
until instructed to do so.
Gently loosen the cover
from the
latch by inserting a flat-headed
screwdriver from above and below.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...