![background image](http://html.mh-extra.com/html/miele/kfn-14827-sde-ed-cs-2/kfn-14827-sde-ed-cs-2_operating-and-installation-instructions_236539051.webp)
Cleaning and care
51
Press the On/Off button
on the ice
cube maker.
Push the drawer all the way back into
the appliance.
As soon as the ice cube maker is
switched on the ice cube tray rotates
back to its original position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
Important: If washing-up liquid
was used for cleaning the ice cube
tray: The first ice cubes may contain
traces of detergent and are therefore
unsuitable for consumption.
Discard the first three batches of ice
cubes after cleaning.
Cleaning the air vents
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example). A build-up of
dust will increase the energy
consumption of the appliance.
Cleaning the door seals
If a door seal is damaged the
door will not close properly and
cooling performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals.
Do not use any oils or grease on the
door seals. They will cause the seals
to deteriorate and become porous
over time.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Summary of Contents for KFN 14827 SDE ed/cs-2
Page 94: ......
Page 96: ...M Nr 09 574 230 05 en AU NZ KFN 14827 SDE ed cs 2 ...