Operation
69
Display of programme duration
The estimated duration of the selected
programme appears on the display
before the programme begins. If the
door is opened during the programme,
the time left until the end of the
programme is displayed.
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the
incoming water, the reactivation cycle
of the water softener, the detergent type
and the amount of dishes and how
soiled they are.
When a programme is selected for the
first time, the display will show the
average programme duration for a cold
water connection.
The programme durations shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
Each time a programme is run, the
control module calculates the
programme duration according to the
temperature of the water taken into the
dishwasher and the size of the load.
Starting the programme
Start the programme by closing the
door.
If necessary, confirm the previously
displayed message with
OK
.
The optical in-operation indicator light
comes on to show that a programme
sequence has been started.
If you open the door, the
message
Crockery can be added
may be
displayed.
As long as this message is showing,
crockery can be added without
compromising wash results.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.
Summary of Contents for G 7960 C SCVi
Page 122: ......
