Microsemi SmartTime User Manual Download Page 132

Page: 132 / 137

SmartTime Static Timing Analyzer User Guide

132

Value

Description

yes

Enables inter-clock domain analysis

Disables inter-clock domain analysis

-use_bibuf_loopbacks

value

Instructs the timing analysis whether to consider loopback path in bidirectional buffers (D->Y, E->Y)as
false-path {no}. Default is

yes

; i.e., loopback are false paths.

Value

Description

yes

Enables loopback in bibufs

Disables loopback in bibufs

-enable_recovery_removal_checks

value

Enables recovery checks to be included in max-delay analysis and removal checks in min-delay analysis.
Default is

yes

Value

Description

yes

Enables recovery and removal checks

Disables recovery and removal checks

-break_at_async

value

Specifies whether or not timing analysis is allowed to cross asynchronous pins (clear, reset of sequential
elements). Default is

Value

Description

yes

Enables breaking paths at asynchronous ports

Disables breaking paths at asynchronous ports

-filter_when_slack_below

value

Specifies a minimum slack value for paths reported by list_paths. Not set by default.

-filter_when_slack_above

value

Specifies a maximum slack value for paths reported by list_paths. Not set by default.

-remove_slack_filters

Removes the slack minimum and maximum set using -filter_when_slack_below and
filter_when_slack_above.

-limit_max_paths

value

Specifies the maximum number of paths reported by list_paths. Default is

100

-expand_clock_network

value

Specify whether or not clock network details are reported in expand_path. Default is

yes

Value

Description

yes

Enables expanded clock network information in paths

Summary of Contents for SmartTime










































































































































Search results

Summary of Contents for SmartTime

Reviews:

Related manuals for SmartTime

Brands by name

Popular brands

Microsemi SmartTime, User Manual

Search results

Summary of Contents for SmartTime

Reviews:

Related manuals for SmartTime

Brands by name

Popular brands