Microsemi SmartTime User Manual Download Page 94

Page: 94 / 137

SmartTime Static Timing Analyzer User Guide

Source Pins

Displays a list of available and valid source pins. You can select multiple pins. To select all source pins, click
the

Select All

button beneath the Source Pins list.

Select All

Selects all the pins in the Source Pins list to include in the path analysis set.

Filter Source Pins

Enables you to specify thesource

Pin Type

and the

Filter

. The default pin type is Registers by pin name.

You can specify any string value for the

Filter

. If you change the pin type, the

Source Pins

shows the

updated list of available source pins.

Sink Pins

Displays list of available and valid pins. You can select multiple pins. To select all source pins, click the

Select All

button beneath the

Sink Pins list.

Select All

Selects all the pins in the Sink Pins list to include in the path analysis set.

Filter Sink Pins

Enables you to specify the sink

Pin Type

and the

Filter

. The default pin type is Registers (by pin). You can

specify any string value for the

Filter

. If you change the pin type, the

Sink Pins

shows the updated list of

available sink pins.

Summary of Contents for SmartTime










































































































































Search results

Summary of Contents for SmartTime

Reviews:

Related manuals for SmartTime

Brands by name

Popular brands

Microsemi SmartTime, User Manual

Search results

Summary of Contents for SmartTime

Reviews:

Related manuals for SmartTime

Brands by name

Popular brands