Microsemi SmartTime User Manual Download Page 121 | Manualshive

Page: 121 / 137

background image

SmartTime Static Timing Analyzer User Guide

121

expand_path

Tcl command; displays expanded path information (path details) for paths. The paths to be expanded are
identified by the parameters required to display these paths with list_paths. For example, to expand the first
path listed with list_paths -clock {MYCLOCK} -type {register_to_register}, use the command expand_path -
clock {MYCLOCK} -type {register_to_register}. Path details contain the pin name, type, net name, cell name,
operation, delay, total delay, and edge as well as the arrival time, required time, and slack. These details are
the same as details available in the SmartTime Expanded Path window.

expand_path

-index

value

-set

name

-clock

clock name

-type

set_type

-analysis {max| min}

-format {csv | text}

-from_clock

clock name

-to_clock

clock name

Arguments

-index

value

Specify the index of the path to be expanded in the list of paths. Default is 1.

-analysis {max | min}

Specify whether the timing analysis is done is max-delay (setup check) or min-delay (hold check). Valid
values: max or min.

-format {csv | text}

Specify the list format. It can be either text (default) or csv (comma separated values). The former is
suited for display the latter for parsing.

-set

name

Displays a list of paths from the named set. You can either use the -set option to specify a user set by its
name or use both -clock and -type to specify a set.

-clock

clock name

Displays the set of paths belonging to the specified clock domain. You can either use this option along
with -type to specify a set or use the -set option to specify the name of the set to display.

-

type set_type

Specifies the type of paths in the clock domain to display in a list. You can only use this option with the -
clock option. You can either use this option along with -clock to specify a set or use the -set option to
specify a set name.

Value

Description

reg_to_reg

Paths between registers in the design

external_setup

Path from input ports to registers

external_hold

Path from input ports to registers

clock_to_out

Path from registers to output ports

reg_to_async

Path from registers to asynchronous pins

external_recovery

Set of paths from inputs to asynchronous pins

«
...
119
120
121
122
123
...
»

Summary of Contents for SmartTime










































































































































Reviews:

No comments

Related manuals for SmartTime

Brand: Camille Bauer Pages: 12

Brand: Harley Benton Pages: 28

SourceMeter 2400

Brand: Keithley Pages: 594

System SourceMeter 2601B

Brand: Keithley Pages: 864

Brand: Labgear Pages: 8

SourceMeter 2600B Series

Brand: Keithley Pages: 897

Brand: National Instruments Pages: 15

Brand: Yamaha Pages: 10

Brand: Yamaha Pages: 38

Brand: Yamaha Pages: 45

Brand: MICRO-EPSILON Pages: 82

Brand: A&D Pages: 2

Brand: Tektronix Pages: 116

TWIN LASER GB II

Brand: Nicols Pages: 22

Brand: jbc Pages: 12

truflo TC Series

Brand: ICON Pages: 6

quartz3 BPR zero

Brand: RBR Pages: 22

ProScale 950 Series

Brand: Accurate Technology Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands