MI 2792 PowerQ4 Plus
Operating the instrument
78
Table 3.87: Description of Communication setup options
Source:
Select RS-232 or USB communication port.
Baud rate:
Select port speed.
GPRS*:
Show status of GPRS communication. GPRS is enabled only
after
INIT
sequence was successfully applied.
Number*:
Phone number of GPRS modem. Phone number is defined
with SIM card.
PIN*:
SIM Card PIN code. Optional parameter which should be
entered only if it was activated on SIM card.
Secret key*:
Key number which assure additional protection of
communication link. Same number should be entered later in
PowerView v2.0, before connection establishment.
Username*:
APN username, provided by mobile operator.
Password*:
APN password, provided by mobile operator.
APN*:
Access point name. Unique identifier that allows connection to
the network, provided by mobile operator.
* Settings needed for GPRS communication are shown in section 4.2.6 (optional
accessory A 1356). For further information refer to A 1356 GPRS Modem User manual.
Table 3.88: Keys functions
INIT
Initialize GPRS modem. See section 4.2.6 for details.
Change communication source (RS – 232, USB)
Change communication speed from 2400 baud to 115200 baud for
RS232 and from 2400 baud to 921600 baud for USB.
Move cursor position during procedure of entering GPRS modem
parameters.
Cursor keys. Select parameter.
Switch between characters and numbers during procedure of entering
GPRS parameters.
Edit selected parameter of GPRS modem.
Back to the “GENERAL SETUP” menu screen.
