MI 2792 PowerQ4 Plus
Operating the instrument
76
Enter or exit a sub menu to set an alarm.
Cursor keys. Select parameter.
Cursor keys. Select parameter or change value.
Confirm setting of an alarm
Back to the “MEASUREMENT SETUP” menu screen.
3.16.4 Signalling setup
Mains Signalling is classified in four groups:
ripple control systems (110 Hz to 3000 Hz);
medium-frequency power-line carrier systems (3kHz – 20kHz);
radio-frequency power-line carrier systems (20kHz – 148.5kHz);
mains-mark
system.
User can define two different signalling frequencies. Signals can be used as a source
for the user defined alarm and can also be included in recording. See section 3.16.3 to
learn how to set up alarms. See section 3.7.3 for instructions how to start recording.
Figure 3.57: Signalling setup screen.
Table 3.84: Keys functions
Change frequency value.
Switch between Signal 1 / Signal 2.
Back to the “MEASUREMENT SETUP” menu screen.
3.17 General Setup menu
From the “GENERAL SETUP”
menu communication parameters, real clock time,
language can be reviewed, configured and saved.
