MI 2792 PowerQ4 Plus
Operating the instrument
74
3.16.2 Event setup
In this menu you can setup voltage events and their parameters. See 5.1.12 for further
details regarding measurement methods. Captured events can be observed through
EVENTS TABLE menu. See 3.13 for details.
Figure 3.55: Voltage events setup screen.
Table 3.80: Description of Voltage event setup
Nominal voltage
Set nominal voltage.
Swell
Set swell threshold value.
Dip
Set dip threshold value.
Interrupt
Set interrupt threshold value.
Capture Events
Enable or disable event capturing.
Note:
Enable events only if you want to capture it without
recording. In case you want observe events only during
recording use option:
Include active events: On
in GENERAL RECORDER
menu.
Note:
In case of Connection type: 1W, it is recommended
to connect unused voltage inputs to N voltage input in order
to avoid false triggering.
Table 3.81: Keys function
Change value.
Select Voltage events setup parameter.
Back to the “MEASUREMENT SETUP” menu screen.
3.16.3 Alarm setup
You can define up to 10 different alarms, based on any measurement quantity which is
measured by instrument. See 5.1.13 for further details regarding measurement
methods. Captured events can be observed through ALARMS TABLE menu. See 3.14
for details.
