4-44 | Model 920 Multi-Gas Analyzer
Setting Calibration Gas Timers
The analyzer uses three independent timers for automatic calibration.
Each timer establishes the duration for which a solenoid valve controlling
the Calibration gas mixture is energized during the Auto-Zeroes, Auto-
Spans, and Auto-Calibrations. The duration depends on the time required
for the Calibration gas mixture to reach the analyzer and to obtain a stable
reading.
Timer0, Timer1, Timer2
Timer0
sets the duration the analyzer Zero gas solenoid valve is turned
on during the Auto-Zero.
Timer1
and
Timer2
establish the duration
that Calibration gas mixtures are turned on during Auto-Span1 and
Auto-Span2.
Timer 2
(and
Auto-Span 2
) is used only when the optional O
2
Sensor
is used (
General Purpose applications/analyzers only
).
The duration for these timers can be set from 0–255 minutes in one-min-
ute increments. Set the duration to ‘
0
’ to turn the timer off (disable the
function). The average reading for Auto-Zero, Auto-Span1, and Auto-
Span2 will be taken during the last 25 percent of the timer duration.
The Timer must be assigned a value that allows the signals to be
stable during the last 25 percent of the countdown.
If a calibration gas is not used, the associated timer must be turned
Off.
Example 1:
To set
Timer0
to 2 minutes (allowing a 30-second averaging time) and
return to CAL mode normal display, press:
CAL>F3 0 Del 3 Ent Ent
Example 2:
Timer2
is not required for control of a calibration gas mixture. Its duration
must be set to ‘
0
’ (off). To set
Timer2
to ‘
0
’ and return to CAL mode nor-
mal display, press:
CAL>F3 2 Del 0 Ent Ent
NOTE
NOTE
Summary of Contents for 920
