Metek 920, Operator'S Manual With Essential Health And Safety Requirements

Page: 171 / 278

Controller / User Interface | 4-63
Manual Start of Auto-Calibration
A manual start of Auto-Calibration does not reset the ACal Timer to its
initial value. The start of the next Auto-Calibration will be timed from the
continuing countdown of the original
ACal Timer setting. To manually
start the Auto-Calibration, press F1 9 Ent (CAL mode).
Example:
The ACal Timer is set at 2 hours, the time remaining until the next timed
Auto-Calibration is 30 minutes, and the Auto-Calibration is started manu-
ally. In this case, the
ACal Timer will continue to count down, and the
time remaining until the next timed Auto-Calibration remains 30 minutes.
Pressing Esc at any time during this procedure will abort the func-
tion and return to CAL mode normal display.
To manually start the Auto-Calibration:
1. Press F1 9 (CAL mode). The software prompts “ Auto/Cal? ”.
2. To start the sequence, press Ent .
Or, press Esc to abort the Auto-Calibration; adjustments are not made.
Upon completion of the sequence, enter another command, or press Esc
to return to RUN mode normal display.

NOTE