Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: [email protected]
•
www.mdt.de
75
75
2 Byte shift of basis comfort setpoint
In the case of the 2-byte shift of basic comfort setpoint, the Push Button sends a new basic comfort
setpoint to the controller. It evaluates the object "state basis comfort setpoint" and sends the new
se/- the set step width to the controller.
The range of the setpoint shift can be adjusted via the upper and lower limits.
The following table shows the available communication objects:
Number
Name
Length Usage
0
Push buttons 1/2 –
Basis comfort setpoint
2 Byte
Sends the Setpoint shift
1
Push buttons 1/2 –
State actual temperature
2 Byte
Receiving an external temperature for the
display of the current temperature.
Is only displayed if the parameter "Use internal
temperature value" is set to "not active"
2
Push buttons 1/2 –
State current setpoint
2 Byte
Receiving the current setpoint temperature of
the temperature controller to display the status
3
Push buttons 1/2 –
State basis comfort setpoint
2 Byte
Receives the current setpoint shift. Has to be
connected to the basic comfort setpoint value of
the controller so that the basic comfort setpoint
can be correctly displaced even when changing
to a different operating mode
Table 68: Communication objects – 2 Byte shift of comfort setpoint value
Presentation:
Two-button function
The temperature shift is represented by the temperature symbol. The display is fixed to the symbol 9.
In addition, the actual value and the desired value can be labeled as desired:
Figure 48: Presentation – Temperature shift
