MDT Technologies BE-GT20S.01, Technical Manual

Page: 68 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
68
68
4.4.12 Mode selection

Single-button function

Two-button function
Function only available for Glass Push Button II Smart with temperature sensor
With the function "Mode selection" the HVAC mode can be toggled in heating actuators or
temperature controllers.
The following figure shows the available settings:
Figure 45: Settings – Mode selection
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Switching values

Comfort /Standby

Comfort/Night

Comfort/Standby/Night

Comfort/Standby/
Night/Frost
Setting between which operating
modes can be toggled.
Push Button long

not active

active
Activates an action for the long
keystroke
Left/Right button:
Action with a long
push of button

Comfort

Standby

Night

Frost
Setting which operating mode
should be called with a long
keystroke to the buttons.
Only with two-button function.
Action with a long
push of button

Comfort

Standby

Night

Frost
Setting which operating mode
should be called with a long
keystroke
Only with single-button function.
Switching type

Limit stop

Overrun
Setting what should happen when
the last switching value is reached.
Only with two-button function