MDT Technologies BE-GT20S.01, Technical Manual

Page: 24 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
24
24
The following parameters are available for both settings
Indicated level after
s tandby
(for Day and Night)

Level 1

Level 2

Level 3
Sets the level that is displayed after
Standby. Number of levels
depending on the display mode in
the menu "Push Button functions.
Only visible if more than 1 level is
active!
Standby display at Night

No standby

Standby in upper
keypad, LED A/B

Standby on full screen,
orientation LEDs

Behavior like Day

Display off, LEDs off

Display off,
orientation-LEDs
Setting the display behavior of the
information screen in Night mode.
When set to "
Behavior like Day " the
settings are accepted by Day mode
and there are no settings for the
standby mode
Action at push button if
display is disabled

Standby is exited

Standby is displayed
Setting the behavior when a key is
pressed when the display is off (e.g.
via presence object)
Action at push button if
standby is active

Function is not
executed

Funktion is executed
Setting whether the key function is
to be executed with the first key
press while beeing in standby
Table 11: Basic Settings – Information Screen
The settings "Standby over full screen, orientation LEDs" and "Display Off, orientation LEDs" allow
RGB status displays of the keys to be used additionally as orientation indicator.
As of hardware version R3.1, there is an option to display
Standby permanently in the upper keypad .
This function can be parameterised from database version V2.4 and higher
If you select the button functions "4 functions/1-3 levels", the parameter is always displayed.
If you select "6 functions/1-2 levels", the parameter is only displayed if buttons 1/2 and 7/8 are set to
"not active".
If the parameter is activated, the following parameter "Standby display at day" is permanently set to
"Standby in the upper keypad, LED A/B".
This allows you to control the
LEDs A/B in Standby mode to display the status during Standby, for
example. For details on setting the LEDs A/B see 4.5 State LED.
Figure 12: Settings – Standby permanently visible in upper keypad