Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: [email protected]
•
www.mdt.de
33
33
4.3.3 Overview: Two-button function / Single-button function
Each push button pair can be activated as a single-button function or as a two-button function.
For the
single button function
, only one key is used for the function.
The
two-button function
always uses 2 buttons for the function and the operating concept works
like a rocker. For each key, you can specify the value (On/Off, Up/Down, Lighter/Darker, etc.) that is
to be sent.
A
function name
can be set for both, the single-button function and the two-button function. The
button labeling, due to the smaller space on the display is only possible for the two-button function.
Up to 20 characters are allowed for the function name.
Only with the two-button function is it possible to give the left and right buttons their own names.
Up to 6 characters are permitted for the button labelling:
Figure 17: Settings – Button labeling - Two-button function
The functions of the single-button function and the two-button function are described in more detail
in chapter 4.4 Push button functions. At the beginning of each function description it is also indicated
whether this function is available as a single-button function, as a two-button function or for both
operating concepts.
