Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
35
35
The
Slap-/Cleaning function
will be executed by pressing 3 or more buttons simultaneously.
The
cleaning function
blocks the push button against further operation or sending out a telegram for
10 seconds. If further keys are pressed within these 10 seconds, e.g. when cleaning the glass surface,
the device remains locked. The cleaning function is indicated by a white flashing of all status LEDs.
The
slap function
can be used as a further key. This allows the sending of a particular command by
simply "slapping" on the button, e.g. when entering a room to turn the light on / off. The slap
function is executed when 3 or more keys are pressed simultaneously. The parameter "slap function"
can be used to set the value to be transmitted. An active slap function can be signalized with a freely
adjustable color via the status LEDs. The status LEDs flash briefly in the set color.
If the cleaning function is deactivated, the slap function can send values for a long keystroke as well
as for a short keystroke.
The following table shows the available communication objects for the Slap / Cleaning function:
Number Name
Length Usage
60
Slap-button short –
Percent value, Decimal value…
Sending the value for the slap button.
DPT according to settings in the parameters
61
Slap-button short –
Value for toggle
1 Bit
Only for "toggle" function.
Receives the current state of the actuator to
be controlled
62
Slap-button long –
Percent value, Decimal value…
Sending the value for the slap button.
DPT according to settings in the parameters
63
Slap-button long –
Value for toggle
1 Bit
Only for "toggle" function.
Receives the current state of the actuator to
be controlled
64
Slap-button – Blocking object
1 Bit
Blocking of the slap function
Table 22: Communication objects – Slap-/cleaning function