MDT Technologies BE-GT20S.01, Technical Manual

Page: 45 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
45
45
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Datapoint type

2Bit DPT 2.001 Forcible control

1Byte DPT 5.001 Percent value
(0…100%)

1Byte DPT 5.005 Decimal factor
(0…255)

1Byte DPT 17.001 Scene number

2Byte DPT 7.600
Color temperature (Kelvin)

2Byte DPT 9.001 Temperature (°C)

2Byte DPT 9.004 Brightness (Lux)

3Byte DPT 232.600
RGB value 3x(0…255)
Setting the data point type to
be sent
Left/right push button:
Percent value, Decimal
factor…. any value according to set datapoint type Only for two-button function .
Setting the values to be sent for
the two buttons
Percent value, Decimal
value…. any value according to set datapoint type Only for single-button function .
Setting the values to be sent for
the button
Table 32: Settings – Send Values - Subfunction: Send Values
The following table shows the available communication objects:
Number Name Length Usage
0 Push button 1:
Push buttons 1/2: –
Forcible control, Percent value… 2 Bit
1 Byte
2 Byte
3 Byte Sending the switching value.
DPT depending on the parameter setting
1 Push buttons 1/2: –
State of percent value, State of
decimal value…. 1 Byte
2 Byte Receive the status for the display.
DPT depending on the parameter setting.
Status for forcible control, scene number
and RGB value not available
.
3 Push button 1 – State for display 1 Byte
2 Byte Receive the status for the display.
DPT depending on the parameter setting.
Status for forcible control, scene number
and RGB value not available
.
Table 33: Communication objects – Send Values - Subfunction: Send Values