Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: [email protected]
•
www.mdt.de
79
79
LED display behaviour
At day (value ON)
Any color
Color for the object value ON when
the button is pressed in day mode
At day (value OFF)
Any color
Color for the object value OFF if no
button is pressed in Day mode
Behavior at day (value
ON)
permanent
blinking
Setting the lighting behavior when
LED has the object value ON or the
button is pressed
At night (value ON)
Any color
Color for the object value ON when
the button is pressed in Night mode
At night (value OFF)
Any color
Color for the object value OFF if no
button is pressed in Night mode
Behavior at night (value
ON)
permanent
blinking
Setting the lighting behavior when
LED has the object value ON or the
button is pressed
Table 71: Settings – LED 1-12/A/B
Each LED can react either to any external object
or
internal object
or
to button operation.
In addition, an LED can also react to an “external/internal object
and
the button operation”. With
this setting, the adjustments in the menu LED 1-12/A/B refer to the control of the LEDs via the object.
In this case, the behavior of the button operation is set globally for all LEDs and is described in menu
4.5.1 LED basic settings. The behavior for the button operation has priority.
If the "
LED reacts to - internal object
" setting is selected, the object number with which the LED is to
be linked is selected.
If, for example (when button 1 is set to Toggle), the LED is to switch when "Object 1 - Status for
toggle" has the value 1, enter the object number 1. In this case the status LED would be switched ON
if the object has a 1 and switched OFF if the object has a 0.
If the LED is linked to an object which is not 1bit, the LED is switched off when the object is set to 0
and turned on when the value of the object is not 0. For an object of the DPT 5.001 (percent) would
mean that the LED is switched off at 0% and is switched on at all other values.
Each LED can accept different colors and behavior for day and night operation and switches
depending on the object "106 - day/night".
If the LED reacts to "
external object
" is set, the corresponding LED can be switched to the group
address with every 1-bit object. A "1" switches ON, a "0" switches OFF the LED.
Each LED can assume different colours and
behaviour for Day and Night operation
and switches
depending on the object "106 - Day/Night”.
The following table shows the available communication object:
Number Name
Length Usage
77
LED 1 – Switch
1 Bit
Controlling the LED.
Object is only displayed if LED reacts to
external object
Table 72: Communication object – LED
