Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: [email protected]
•
www.mdt.de
63
63
4.4.9 Dimming
Single-button function
Two-button function
The dimming function can be used to control dimming actuators.
The following figure shows the available settings (here for two-button function):
Figure 41: Settings – Dimming
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Assignment of push buttons
brighter/darker
darker/brighter
Only with two-button function.
Setting the key assignment
(left/right key) for the direction
(brighter/darker)
Table 52: Settings – Dimming
If a button is parameterized as a dimming function, this button shows two communication objects,
on the one hand the function for the short keystroke, the switching object "dimming on/off", and on
the other hand the function for the long keystroke, the dimming object "dimming relative".
The two-button function "dimming" can be parameterized either as brighter/darker or as
darker/brighter. The following table shows the relationships:
Table 53: Two-button function – Dimming
With the one-button function "dimming", the direction (brighter/darker) is reversed as a function of
the communication object "value for toggle". The dimming function is a start-stop dimming that
means as soon as the dimming function becomes active a light or dark command is assigned to the
input until it is released. After releasing, a stop telegram is sent which finishes the dimming process.
The following table shows the available communication objects:
Number
Name
Length Usage
0
Push button 1:
Push buttons 1/2: – Dimming On/Off
1 Bit
Switching command for the dimming
function
1
Push button 1:
Push buttons 1/2: – Dimming relative
4 Bit
Command for relative dimming
2
Push button 1 –
Value for toggle
1 Bit
Only for single-button operation.
Feedback signal about the current state
of the actuator to be switched
3
Push button 1:
Push buttons 1/2: – State for display
1 Byte
Receive of the status of the current,
absolute brightness
Table 54: Communication objects – Dimming
Function brighter/darker
Function darker/brighter
Button - Input
Button left
Button right
Button left
Button right
Dimming function
brighter
darker
darker
brighter
Switching function
ON
OFF
OFF
ON
