Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
154
154
The parameter "
LED colour at button activation
" defines the colour change of all status LEDs when a
button is activated, if they are assigned twice by the setting "LED reacts to external/internal object
and
button activation". In this case, the settings in the LED 1-6/Direct buttons 1-4 menu refer to
control via the object, and the global parameter "LED colour at button activation" defines the
behaviour at button activation.
Flashing status LEDs can be synchronised via the synchronisation object for the flashing status. This
makes it possible to ensure that all the LEDs in a room flash in the same rhythm. One operating unit
in the room is defined as master and all other operating units as slaves. The LED flashing status
objects are linked to each other in a group address.
The execution of the action for the long push-button action is signalled by the status LED going out.
Using the parameter "
Control LEDs of direct buttons separately
", it is possible to visualise different
statuses in the direct button level than in the other function levels. If this parameter is active, 4
additional submenus are displayed for the LED behaviour of the 4 direct buttons. The behaviour of
the 6 LEDs in the other function levels is set via the submenus LED 1-6 and applies to all function
levels except the direct keys if they are controlled separately.
The following table shows the available communications objects:
Number
Name
Length
Usage
206
LED
–
Blocking object
1 Bit
Locking all LEDs
207
LED
–
Blinking status
1 Bit
Synchronization of the flashing status
Table 150: Communication objects - Status LEDs
